search

Eggtimer Rocketry Flight Computer Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 48
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
- 20 -
G CHB Enable (0-Off, 1-IGN, 2-Servo CCW, 3-Servo CW, 4-Airstart)
H CHB On-Time <1-9, 0-Cont.> {only if CHB Enable =1 or 4}
H Servo PWM <0-9> {only if CHB Enable = 2 or 3}
This setting controls the Channel B deployment channel. When set to “0”, the channel is turned
off, so the other settings don’t matter. When set to 1-3, the deployment channel turns on at nose-
over, 1 second after apogee. If this setting is 2 or 3, the deployment channel sends out pulses
that can control standard analog hobby servos. The amount of servo rotation is controlled by the
Servo Skew value, each tick changes the servo pulse width (nominally 1.5 ms) by plus-minus
100 microseconds, so the total possible range of servo pulse width is .5 to 2.5 ms. The servo
pulses are sent for 3 seconds after deployment, this value is not configurable but is more than
adequate for even the slowest servos.
If CHB Enable is set to 4, the channel is used for airstarts. Channel B will fire on the way UP,
after the Breakwire has been tripped AND LDA has been reached AND the Burn Timer AND
Airstart Delay timers expire. See Appendix D for more information on airstarts. WE
STRONGLY RECOMMEND THAT YOU RUN A SOFTWARE SIMULATION ON ANY
AIRSTART CONFIGURATION BEFORE SETTING THE AIRSTART DELAY VALUE.
The effect of the settings are:
CHB Enable CHB On Time
0 n/a Deployment Channel OFF
1 1-9 secs Deployment channel activated at Nose-Over
for CHB-ON seconds
1 0 Deployment channel activated at Nose-Over
and held on continuously until Reset
4 1-9 secs Deployment channel activated after expiration
of Burn Timer/Airstart Delay for CHB-ON
seconds, IF the breakwire has been tripped
4 0 Deployment channel activated after expiration
of Burn Timer/Airstart Delay and held on
continuously until Reset, IF the breakwire has
been tripped
CHB Enable Servo PWM
2 0-9 Deployment channel activated at Nose-Over
in servo mode, counter-clockwise, amount of
rotation controlled by Servo PWM setting
3 0-9 Deployment channel activated at Nose-Over
in servo mode, clockwise, amount of
rotation controlled by Servo PWM setting
The time and altitude of the CHB deployment are recorded in Flight Summary memory for later
downloading. Note that in the case of Airstarts at high speed, this data may not be accurate,
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Barebones Pc / Estación De Trabajo Eggtimer Rocketry Flight Computer
Barebones Pc / Estación De Trabajo Eggtimer Rocketry Flight Computer Manual de usuario   (17 paginas)
Barebones Pc / Estación De Trabajo Eggtimer Rocketry Flight Computer Guía de usuario   (25 paginas)
Barebones Pc / Estación De Trabajo Eggtimer Rocketry Eggtimer Especificaciones   (23 paginas)

Hubbardton-forge 18640 manuals

Owner’s manuals and user’s guides for Lighting Hubbardton-forge 18640.
We providing 1 pdf manuals Hubbardton-forge 18640 for download free by document types: User Manual


Hubbardton forge 18640 User Manual (2 pages)


Brand: Hubbardton-forge | Category: Lighting | Size: 0.39 MB |

 

Table of contents

24207

1




More products and manuals for Lighting Hubbardton-forge

Models Document Type
18650 User Manual   Hubbardton Forge 18650 User Manual, 3 pages
18660 User Manual   Hubbardton Forge 18660 User Manual [en] , 4 pages
18667 User Manual   Hubbardton Forge 18667 User Manual, 2 pages
18715 User Manual   Hubbardton Forge 18715 User Manual, 3 pages
18725 User Manual   Hubbardton Forge 18725 User Manual [en] , 3 pages
18730 User Manual   Hubbardton Forge 18730 User Manual, 3 pages
18761 User Manual   Hubbardton Forge 18761 User Manual, 2 pages
18453 User Manual   Hubbardton Forge 18453 User Manual, 7 pages
18455 User Manual   Hubbardton Forge 18455 User Manual, 7 pages
18775 User Manual   Hubbardton Forge 18775 User Manual, 2 pages
18810 User Manual   Hubbardton Forge 18810 User Manual [en] , 3 pages
18820 User Manual   Hubbardton Forge 18820 User Manual, 3 pages
18793 User Manual   Hubbardton Forge 18793 User Manual, 5 pages
18825 User Manual   Hubbardton Forge 18825 User Manual, 3 pages
209301 User Manual   Hubbardton Forge 209301 User Manual, 1 pages
207843 User Manual   Hubbardton Forge 207843 User Manual, 1 pages
18860 User Manual   Hubbardton Forge 18860 User Manual, 3 pages
18870 User Manual   Hubbardton Forge 18870 User Manual [en] , 3 pages
204212 User Manual   Hubbardton Forge 204212 User Manual, 2 pages
204101 User Manual   Hubbardton Forge 204101 User Manual, 2 pages

  • Intec Cool-Icam John Wiley & Sons Frandsen Unisen
  • Philips Aspiradores Portátiles Ariston Cafeteras Acer Tarjetas de interfaz / adaptadores Delta Electronics No Dell Software de seguridad antivirus
  • Epson 10000XL Samsung S22B150N Motorola RADIUS GM300 Philips AJ7000/12 HP ZBook 15 G3 Base Model Mobile Workstation
  • HP Pavilion 32 QHD 32-inch Display Manual de usuario NEC IPK Manual de usuario Asus G50AB Manual de usuario Sharp DK-A10BK Instrucciones de operaciones Sony MHC-ZX10 Manual de usuario

    • © 2020, manymanuals.es. Todos los derechos reservados | 0.020 s |
    Manymanuals.com Manymanuals.de Manymanuals.fr Manymanuals.it
    Manymanuals.pl Manymanuals.cz Manymanuals.es Manymanuals-pt.com